drew0020
Jun 18, 10:31 AM
The southpark mall in Charlotte NC opens at 6am and only one door opens at that time. So I am getting there around 5:30am. Maybe I'll get lucky and no one will show up that early :)
Make sure you give us updates on the line :) I will be there between 7-8am if AT&T screwed up my pre-order...
Make sure you give us updates on the line :) I will be there between 7-8am if AT&T screwed up my pre-order...
Ceebee1980
May 6, 02:43 AM
There are definitely some strong yet subtle speed boosts. Some of what I noticed:
-Radeon 6750m screen tearing is gone.
-Safari seems snappier. Not joking though. A lot faster.
-Trackpad responsiveness is drastically increased in Safari and elsewhere. Before, I had issues where if I clicked on the bookmark bar, it wouldn't register the click sometimes. Very annoying. But now it seems to be fixed.
-No ssd for me, but reboot times seem a bit faster.
-Temps seem a hair lower too.
-Radeon 6750m screen tearing is gone.
-Safari seems snappier. Not joking though. A lot faster.
-Trackpad responsiveness is drastically increased in Safari and elsewhere. Before, I had issues where if I clicked on the bookmark bar, it wouldn't register the click sometimes. Very annoying. But now it seems to be fixed.
-No ssd for me, but reboot times seem a bit faster.
-Temps seem a hair lower too.
cayley
Apr 3, 02:46 PM
What are some good Go clients/servers?
madog
Feb 16, 12:33 AM
Everything ran smoothly for the... ohhh 4-5 years I've had Mac OS X. Then, one day a couple of weeks ago [using 10.3.7], my internet magically "shuts down" while my computer is on [this is the only pretext to my finder problem]. Nothing I could do could restart the internet: power cycling the modem/router, creating new connection settings, whatever. So then, I decided to restart. This is when my Finder hung at startup. Soooo, I let it sit there for a while and after about 5 min of not touching anything [not trying to relaunch Finder] it will startup. However, if the Finder hangs [for me] at startup, the internet will not work at all. Soooo crap.
So I went through my basic troubleshooting scheme, rebooting from a CD and running the likes of DiskWarrior, TechTool4 and DiskUtility. The first time I did this, everything went back to normal. However, after another 12 hours of the computer being on, the internet mysteriously cut out again, so I knew the Finder would hang if I rebooted [which it did]. So I did what I had done before but this time nothing worked. Soooo I tried a combo power-cycling modem/router-while-booted-from-cd-and-running-repairs thing and it worked. So I went along my merry way and it happened again. This time after about 24 hours.
So then I boot up from my Panther disk to run repairs from there. This time, I only have my modem unplugged [in all/any way it can be unplugged] and upon restart it worked fine. Good. Great. Dandy.
Then after another unknown amount of hours [2 days or so] it happens [i]again. Sigh.....
"OK, screw this", I thought. I'll just reinstall and everything will be OK. So I boot from my Panther disk, zero my boot drive and reformat to Journaling ["Fine, if Mac OS X would rather have journaling then it might make my life easier"]. I reinstall only the BSD Subsystem as an option so I only have to use 1 disk. Then I go about re-customizing my OS to my liking, adding this time only LittleSnitch, MenuMeters and TransperantDock [as opposed to all the crap I had on before, with around 10 "other" system preference panes and a "full" Applications folder]. Then after another 48 hours the system craps out. Just long enough after I had everything to my liking.
"ARGH!"
So I go about reinstalling again, this time from a friends Panther disk, just to make sure. Instead of zeroing the drive again, I just erase and reinstall. Upon the very first restart, the Finder hung........ "Dear Mac Gods......"
So the next time, I try zeroing AND "8-way random write" to my drive just to make sure everything is nice and clear before I start again. Oh, by the way, did you know it takes around 13 hours to 8-way random write to a 30gb hard drive? Anyway, this time I get it started after and immediately [as I usually do] run permission repair and then update my OS. Then after reboot, I repair permissions again and proceed to get more updates. Oh, and at this time I had been recieving weird permission problems such as:
User differs on ., should be 0, owner is 501
Permissions differ on ., should be drwxrwxr-t , they are drwxrwxr-x
Owner and group corrected on .
Permissions corrected on .
and
Permissions differ on ./private/etc/slpsa.conf, should be -rwxr-xr-x , they are -rw-r--r--
Owner and group corrected on ./private/etc/slpsa.conf
Permissions corrected on ./private/etc/slpsa.conf
I repair my permissions regularly and have never seen either of those before.
Let's see.... where was I.... oh, 3rd reinstall I think.
Ok, so I continue to update my system [this install was when 10.3.8 came out, before the full combo update] and get it to 10.3.8. I happily chug along thinking 10.3.8 was a god send, and go forth and install LittleSnitch and MenuMeters [two things I can't live without] directly from the developer sites. Then the problem happens AGAIN after another 24 hours or so of no restart after installing LS.
So now I'm really angry. I search Apple's boards and google the problem to find that it's happened to more than a few people. They have suggestions such as to reset pram, delete user and system caches and delete certain user/system preferences. "How could I have a corrupt cache or pref on a fresh install?", I think. So I reboot and let the system hang until it finally boots up [but with no internet access] and I enable invisible items and proceed to trash all my caches [only this so far]. Since some are still in use, I have to reboot to empty the trash. So I do so. The Finder hangs the next start up, but I figure that's just a warmup for the files I just deleted. So I restart again. Finder still hangs. Luckily I had to leave at this point, so I keep my system running, getting ready to rein
more...
Access Archives: Kate Winslet
The Sleek Ponytail: This
more...
kate winslet movies list hot
Kate Winslet pictures 2011
more...
Kate Winslet Hot PSP Wallpaper
Kate Winslet Latest wallpapers
more...
kate winslet hot video in jude
Kate winslet
more...
Celebrity Hot Women Pics
Kate Winslet and her fabulous
more...
When we asked Kate Winslet if
Hot Kate Winslet: Hot Kate
more...
Kate Winslet Hot Wallpaper
Kate Winslet Hot Pic
Kate Winslet Cute Cool
So I went through my basic troubleshooting scheme, rebooting from a CD and running the likes of DiskWarrior, TechTool4 and DiskUtility. The first time I did this, everything went back to normal. However, after another 12 hours of the computer being on, the internet mysteriously cut out again, so I knew the Finder would hang if I rebooted [which it did]. So I did what I had done before but this time nothing worked. Soooo I tried a combo power-cycling modem/router-while-booted-from-cd-and-running-repairs thing and it worked. So I went along my merry way and it happened again. This time after about 24 hours.
So then I boot up from my Panther disk to run repairs from there. This time, I only have my modem unplugged [in all/any way it can be unplugged] and upon restart it worked fine. Good. Great. Dandy.
Then after another unknown amount of hours [2 days or so] it happens [i]again. Sigh.....
"OK, screw this", I thought. I'll just reinstall and everything will be OK. So I boot from my Panther disk, zero my boot drive and reformat to Journaling ["Fine, if Mac OS X would rather have journaling then it might make my life easier"]. I reinstall only the BSD Subsystem as an option so I only have to use 1 disk. Then I go about re-customizing my OS to my liking, adding this time only LittleSnitch, MenuMeters and TransperantDock [as opposed to all the crap I had on before, with around 10 "other" system preference panes and a "full" Applications folder]. Then after another 48 hours the system craps out. Just long enough after I had everything to my liking.
"ARGH!"
So I go about reinstalling again, this time from a friends Panther disk, just to make sure. Instead of zeroing the drive again, I just erase and reinstall. Upon the very first restart, the Finder hung........ "Dear Mac Gods......"
So the next time, I try zeroing AND "8-way random write" to my drive just to make sure everything is nice and clear before I start again. Oh, by the way, did you know it takes around 13 hours to 8-way random write to a 30gb hard drive? Anyway, this time I get it started after and immediately [as I usually do] run permission repair and then update my OS. Then after reboot, I repair permissions again and proceed to get more updates. Oh, and at this time I had been recieving weird permission problems such as:
User differs on ., should be 0, owner is 501
Permissions differ on ., should be drwxrwxr-t , they are drwxrwxr-x
Owner and group corrected on .
Permissions corrected on .
and
Permissions differ on ./private/etc/slpsa.conf, should be -rwxr-xr-x , they are -rw-r--r--
Owner and group corrected on ./private/etc/slpsa.conf
Permissions corrected on ./private/etc/slpsa.conf
I repair my permissions regularly and have never seen either of those before.
Let's see.... where was I.... oh, 3rd reinstall I think.
Ok, so I continue to update my system [this install was when 10.3.8 came out, before the full combo update] and get it to 10.3.8. I happily chug along thinking 10.3.8 was a god send, and go forth and install LittleSnitch and MenuMeters [two things I can't live without] directly from the developer sites. Then the problem happens AGAIN after another 24 hours or so of no restart after installing LS.
So now I'm really angry. I search Apple's boards and google the problem to find that it's happened to more than a few people. They have suggestions such as to reset pram, delete user and system caches and delete certain user/system preferences. "How could I have a corrupt cache or pref on a fresh install?", I think. So I reboot and let the system hang until it finally boots up [but with no internet access] and I enable invisible items and proceed to trash all my caches [only this so far]. Since some are still in use, I have to reboot to empty the trash. So I do so. The Finder hangs the next start up, but I figure that's just a warmup for the files I just deleted. So I restart again. Finder still hangs. Luckily I had to leave at this point, so I keep my system running, getting ready to rein
more...
simsaladimbamba
Apr 22, 05:22 PM
www.mac2sell.net or eBay (Việt Nam (http://chodientu.vn/ebay), T�rkiye (http://www.gittigidiyor.com/), Česk� republika (http://www.eim.ebay.cz/), Hanguk (http://www.auction.co.kr/default.html)) might be good price checkers.
Selling outside the Marketplace
All threads offering items for sale or trade, asking to buy items, or asking for pricing advice on items to be sold must be posted in the Marketplace forum, which is accessible only to qualified members and subject to additional rules; see the Marketplace Rules for details. Members not eligible for the Marketplace forum may not start threads elsewhere for such purposes.
from http://guides.macrumors.com/Help:Forum_Rules#Things_Not_to_Do
Eligibility.
To use the Marketplace forum (read threads, start threads, or post replies), you must be a forum member with user title 6502 or above, which means that you have 250 or more posts as displayed in your User Profile. This gives other members a chance to become familiar with you. To see your User Profile, click Quick Links -> My Profile at the top of a forum page. You must also have been a member for at least 180 days.
from http://guides.macrumors.com/Help:Marketplace_Rules#General_Rules
Selling outside the Marketplace
All threads offering items for sale or trade, asking to buy items, or asking for pricing advice on items to be sold must be posted in the Marketplace forum, which is accessible only to qualified members and subject to additional rules; see the Marketplace Rules for details. Members not eligible for the Marketplace forum may not start threads elsewhere for such purposes.
from http://guides.macrumors.com/Help:Forum_Rules#Things_Not_to_Do
Eligibility.
To use the Marketplace forum (read threads, start threads, or post replies), you must be a forum member with user title 6502 or above, which means that you have 250 or more posts as displayed in your User Profile. This gives other members a chance to become familiar with you. To see your User Profile, click Quick Links -> My Profile at the top of a forum page. You must also have been a member for at least 180 days.
from http://guides.macrumors.com/Help:Marketplace_Rules#General_Rules
numlock
Feb 16, 02:09 AM
I just recently purchased the xion audio profile lp player which as a usb connector. I know its not professional level equipment.
I have been dabbling around with it and I have it connected to cd spin doctor. When its time to save the imported audio the following options are presented
aif/aiff
linear pcm, 8 bit big-endian signed integer
linear pcm, 16 bit big-endian signed integer
linear pcm, 24 bit big-endian signed integer
linear pcm, 32 bit big-endian signed integer
wav
linear pcm, 8 bit big-endian unsigned integer
linear pcm, 16 bit big-endian signed integer
linear pcm, 24 bit big-endian signed integer
linear pcm, 32 bit big-endian signed integer
linear pcm, 32 bit big-endian floating point
linear pcm, 64 bit big-endian floating point
u-law 2:1
a-law 2:1
apple mpeg4 audio
aac
mpeg4 high efficiency aac
mpeg4 low delay aac
apple lossless
After being imported the songs will be imported to itunes and played there and on an ipod.
so my questions are
Is audacity better than cd spin doctor for such a simple project
Is there a way to find out the quality of the audio that comes in on the usb cable from the vinyl player?
What format should the source files be saved in?
thanks in advance
I have been dabbling around with it and I have it connected to cd spin doctor. When its time to save the imported audio the following options are presented
aif/aiff
linear pcm, 8 bit big-endian signed integer
linear pcm, 16 bit big-endian signed integer
linear pcm, 24 bit big-endian signed integer
linear pcm, 32 bit big-endian signed integer
wav
linear pcm, 8 bit big-endian unsigned integer
linear pcm, 16 bit big-endian signed integer
linear pcm, 24 bit big-endian signed integer
linear pcm, 32 bit big-endian signed integer
linear pcm, 32 bit big-endian floating point
linear pcm, 64 bit big-endian floating point
u-law 2:1
a-law 2:1
apple mpeg4 audio
aac
mpeg4 high efficiency aac
mpeg4 low delay aac
apple lossless
After being imported the songs will be imported to itunes and played there and on an ipod.
so my questions are
Is audacity better than cd spin doctor for such a simple project
Is there a way to find out the quality of the audio that comes in on the usb cable from the vinyl player?
What format should the source files be saved in?
thanks in advance
more...
Carmageddon
Mar 2, 11:55 AM
Anyone remember this one? I always wondered if anyone had one and what the gaming experience was like? I don't know if it ever made it into production... anyone actually own one here?
OutThere
Dec 3, 10:34 PM
here are some pics:
more avalible upon request...
the processor is celeron.
the computer does come with a working battery that holds 46 min. of charge as well, as an extra battary cover, a phone cord, and ethernet cord, the power adapter, an external mouse., and if I can find it, a copy of windows ME will also be included. This computer has been very well taken care of by me, but I switched to mac, so I don't need this anymore :)
:eek: Windows Me! *cries in the corner*
more avalible upon request...
the processor is celeron.
the computer does come with a working battery that holds 46 min. of charge as well, as an extra battary cover, a phone cord, and ethernet cord, the power adapter, an external mouse., and if I can find it, a copy of windows ME will also be included. This computer has been very well taken care of by me, but I switched to mac, so I don't need this anymore :)
:eek: Windows Me! *cries in the corner*
more...
md63
Mar 14, 12:21 PM
I have an original iPad which is jail broken and has displayout installed. I picked up the new HDMI adapter from the Apple store and every app mirrors perfectly except for Netflix. With Netflix I get a red Netflix screen on my TV, however, the video only plays on the iPad.
All other applications including Air Video, ABC player, and Videos installed through iTunes play on both screens.
Any thoughts would be appreciated.
Thanks
All other applications including Air Video, ABC player, and Videos installed through iTunes play on both screens.
Any thoughts would be appreciated.
Thanks
scutts
Apr 12, 12:31 PM
CapsuleRebel, while looking awesome and offering great protection, is pain in the ass to take it off the phone. Just something you should know as you said it should be easy to remove. I don't have any experience with Trim/Vulcan but a TPU case is a TPU case. It will fit / protect and will be easy to remove.
more...
archer75
May 6, 06:34 PM
I run a windows server at home with my movie collection and it has that uptime and then some.
In fact the only time it goes down is when the power goes out or I turn it off when I go on vacation.
On my acer windows 7 laptop, aside from going to sleep I haven't restarted it in months.
In fact the only time it goes down is when the power goes out or I turn it off when I go on vacation.
On my acer windows 7 laptop, aside from going to sleep I haven't restarted it in months.
MacBytes
Dec 21, 05:03 AM
Category: Mac Websites
Link: Spymac 3.0 Teaser Trailer (http://www.macbytes.com/link.php?sid=20031221060334)
Posted on MacBytes.com (http://www.macbytes.com)
Approved by arn
Link: Spymac 3.0 Teaser Trailer (http://www.macbytes.com/link.php?sid=20031221060334)
Posted on MacBytes.com (http://www.macbytes.com)
Approved by arn
more...
OSMac
Mar 4, 10:43 PM
Might be able to downgrade if you were JB before the upgrade and saved your keys with cydia or tiny umbrella.
ProfDrSilver
Oct 20, 10:48 PM
15K PPD? Would you care to explain? With the new version of VMware 3.0 I can get it to do 8000 to 9000PPD on two 4 Core instances....
more...
mikeschmeee
Apr 19, 10:25 AM
I'm in favor for a BB youtube code. I rather clicking links or opening in a new tab/page
I rather just have it ready to be loaded on site.
I rather just have it ready to be loaded on site.
TomKing
Apr 27, 02:15 AM
But yeah, the other point to note out is that a good few of the plug-ins that we use for Adobe Premiere and after effects are only single processor enabled. so 20 cores at 2.2Ghz isnt going to be as fast as 2 cores at 3.5Ghz. (for those effects at least)
Premiere will use the other cores, but for me i'd rather 4/6 cores with a higher clock speed and the matrox compressHD card, than a more expensive 8/12 core machine, with lower clock speed and no budget left for the compress card.
Premiere will use the other cores, but for me i'd rather 4/6 cores with a higher clock speed and the matrox compressHD card, than a more expensive 8/12 core machine, with lower clock speed and no budget left for the compress card.
more...
galimk
Apr 23, 05:30 PM
Look in your book for exactly what you're supposed to use for #import. You may have made a mistake.
I'm not sure, but #import <Fraction.h> seems wrong to me. If Fraction.h were a system-provided class, it would be correct. But it's a developer-created class, so #import "Fraction.h" seems more sensible to me, and is what I've always used when referring to class headers I create.
Post your code.
No one with any programming experience would believe anyone (beginner or experienced) who says there are no compilation errors, unless the code has actually been compiled without errors. You may be right, but we need to see the evidence of the compiler.
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
I'm not sure, but #import <Fraction.h> seems wrong to me. If Fraction.h were a system-provided class, it would be correct. But it's a developer-created class, so #import "Fraction.h" seems more sensible to me, and is what I've always used when referring to class headers I create.
Post your code.
No one with any programming experience would believe anyone (beginner or experienced) who says there are no compilation errors, unless the code has actually been compiled without errors. You may be right, but we need to see the evidence of the compiler.
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
mpw
Sep 9, 06:28 AM
...What's the most inappropriate act to be on stage at an Apple keynote?...
The Chairman of Sony at last years WWDC? What was the point?
I�ve not seen anyone comment on it, so it might just be me, but anyone else find Gold Diggar sexist?
The Chairman of Sony at last years WWDC? What was the point?
I�ve not seen anyone comment on it, so it might just be me, but anyone else find Gold Diggar sexist?
roland.g
Nov 11, 02:32 PM
Many people discuss iOS in either the iPhone or iPad forums. Or possibly down in a software forum. I think we need a Forum for iOS discussion. Preferably at the top or bottom of the iPhone, iPad and iPod forums. Since these devices, the iPhone, iPod Touch, and iPad are now converging at 4.2, many features and elements relating to betas, release dates, and other functionality is relevant to all types of iOS device and it would be nice to have a central place to discuss it.
If there already is a place, it is neither obvious or easy to find. Nor should it be lumped into any of the main forums in Apple Applications or Apple Systems & Services without at least having its own sub-forum.
If there already is a place, it is neither obvious or easy to find. Nor should it be lumped into any of the main forums in Apple Applications or Apple Systems & Services without at least having its own sub-forum.
nixoninajar
Mar 25, 04:19 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3 like Mac OS X; ja-jp) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8F190 Safari/6533.18.5)
So is there anyone at the Pacific Center yet ?
So is there anyone at the Pacific Center yet ?
iLucas
Apr 24, 10:42 PM
hows this deal?
Here (http://www.buy.com/prod/13-3-macbook-intel-core-2-duo-2-4ghz-4gb-ram-500gb-hard-drive-nvidia/q/sellerid/31064376/loc/101/217650314.html)
If you're willing to spend that much then why not just get a baseline 2011 MBP?
The Intel i series of the new MBPs will be far better than that C2D found in that macbook. See here (http://store.apple.com/us/browse/home/shop_mac/family/macbook_pro?mco=MTM3NjU5MzU)
Here (http://www.buy.com/prod/13-3-macbook-intel-core-2-duo-2-4ghz-4gb-ram-500gb-hard-drive-nvidia/q/sellerid/31064376/loc/101/217650314.html)
If you're willing to spend that much then why not just get a baseline 2011 MBP?
The Intel i series of the new MBPs will be far better than that C2D found in that macbook. See here (http://store.apple.com/us/browse/home/shop_mac/family/macbook_pro?mco=MTM3NjU5MzU)
sushi
Dec 16, 05:35 PM
I sent my 15" PB to service because of the horizontal lines issue. They replaced the LCD screen, and yes, the lines are still there, but fainter. Now it seems though as my Airport won't work. What could be wrong?
Without knowing more about your situation, I would suggest that you re-setup your airport from your PB15 using the utility.
Of course you will need to know the original settings for your ISP before you try this.
Sushi
Without knowing more about your situation, I would suggest that you re-setup your airport from your PB15 using the utility.
Of course you will need to know the original settings for your ISP before you try this.
Sushi
zweigand
Apr 6, 11:54 PM
Brands, and or companies.
Apple
Amazon
Roku
Netflix
OWC
Apple
Amazon
Roku
Netflix
OWC
hob
Oct 22, 08:47 AM
I agree with posts above - fantastic. :)
Thanks for all the compliments :)
Maybe you could 'redo' it and mention Front Row and the built-in iSight in the features list?I'm working on it as we speak! Expect something by tomorrow morning!
Thanks for all the compliments :)
Maybe you could 'redo' it and mention Front Row and the built-in iSight in the features list?I'm working on it as we speak! Expect something by tomorrow morning!
No comments:
Post a Comment